Table of Contents
Advertisement
User Manual
MTIRW IR/RF Remote Controller
Fig. 5 Setting the RF receiver address
3.4 Firmware Upgrade
To upgrade the Remote Controller firmware it is necessary to connect it via USB to a PC.
When the device remote is connected open 'my computer', double click to open mobile
devices 'CRP DISABLED'. Simply replace the new existing 'firmware.bin' with the new
'.bin' file. To complete the upgraded disconnect the Remote Control from the computer
and then reset it.
Fig.6 Firmware Upgrade
3.5 Universal code
The Remote Controller has built-in HDL IR codes, which can be used to control all HDL
panels and no need to learn the IR codes.
For example:
1) In '1 Col panel' page, you can control of 1 Col panels, 2 Col panels, touch panels, and
even LCD DLP panels is possible.
2) But in "DLP panel" page, you just can control DLP panels.
3.6 Changing Icons
To change the Icon shown on the Remote Control, please use the HDL Easy
Engineering Editor (Icon "Remote Controller" on the menu bar).
Icon size: (pixel)
DLP panel:
64*25
IR panel:
64*25
RF pane:
64*25
Remote Controller – User Manual
5
Advertisement
Table of Contents
