HDL-MTIRW, IR/RF Remote Controller, support IR and RF emitting, and IR learning. RF emitting should work with receiver, after setting up the control targets in the HDL-Bus pro tool software, you can control any devices by the Remote Controller. 1.1 Features Support all HDL panels via IR ...
Control button: those No.1 to No.8 buttons can control corresponding buttons in HDL panel. NO.9 and.0 are invalid. : up and down to change parameters, and can select HDL panel when you control, there are 6 kinds of panel can be selected. ...
MTIRW IR/RF Remote Controller 2. Parameters setting BL Level: can set the brightness of the LCD, the range is 0 to 10. Sound EN:can enable/disable the button voice. Language:can select Chinese or English language of the remoter. ...
Fig. 6 Upgrade firmware 2.5 Universal code The Remote Controller has built-in HDL defined IR codes, which can be used to control all HDL panels, no need to learn IR code. “DLP panel” page can’t control other panel except DLP panel.
MTIRW IR/RF Remote Controller 2.6 Icon changed To change the Icon showed on the Remote Controller, please use HDL Easy Engineering Editor (Icon “Remote Controller” on the menu bar). 3. How to use Remote Controller 3.1 DLP panel control DLP panel control Press the button to select the DLP panel.
Touch panel contains: 1/2/3/4 button switch 1 Col /2 Col /Touch panel’s control: Press the button to select the page of HDL panel (1 Col, 2 Col or Touch panel). Press the button , can change the panel with different button number press No.1 to No.8 buttons can...
, can change the page of RF panel, the default is 6 pages and each page has 8 control buttons. press No.1 to No.8 buttons can control the HDL RF receiver, and then can control the objects. At last, you can press the button to select Fig.