How To Use The Remote Control; Dlp Panel Control - HDL -MTIRW User Manual

4. How to use the Remote Control

4.1 DLP panel control

Fig. 7 DLP panel interface
Fig. 8 HVAC interface
Fig. 9 Z-audio interface
Fig. 10 Floor heating interface
Remote Controller – User Manual
DLP panel control：
 Press the or
 Press the or button to change the DLP panel's page.
 The Remote control has 10 buttons,
numbers 1-8 can control the corresponding buttons in
panels.
 If the button's mode is simple on/off switching, then the
target can be a single channel or lighting scene. If the
button is long pressed it can be used to increase or
decrease the brightness.
Air-conditioner control：
 Button 1/2：HVAC ON/OFF
 Button 3/4：reduce/increase temperature
 Button 5/6：change fan speed
 Button 7/8：change mode
Music control：
 Button 1/2：set sound source/ON or stop
 Button 3/4：select previous/next play list
 Button 5/6：select previous/ next song
 Button 7/8：reduce/increase sound
Floor heating control：
 Button1/2：switch for floor heating
 Button3/4：set temperature
 Button5/6：display indoor or outdoor temperature
 Button7/8：change mode, Normal, Day, Night, Away,
Time
MTIRW IR/RF Remote Controller
button to select the DLP panel.
User Manual
11