Icon Changed; How To Use Remote Controller; Dlp Panel Control - HDL -MTIRW Product Manual

2.6 Icon changed

To change the Icon showed on the Remote Controller, please use HDL
Easy Engineering Editor (Icon "Remote Controller" on the menu bar).

3. How to use Remote Controller

3.1 DLP panel control

Fig. 7 DLP panel interface
Fig. 8 HVAC interface
Fig. 9 Z-audio interface
MTIRW IR/RF Remote Controller
DLP panel control
1) Press the button
2) Press the button
3)
to No.8 buttons of Rmote controller can control
corresponding buttons in panels
4) If the button's mode is sing on/off, the target is single
channel lighting or scene, long press the button increase or
decrease the brightness
Air-condition control：

Button 1/2：HVAC ON/OFF

Button 3/4：reduce/increase temperature

Button 5/6：change fan speed

Button 7/8：change mode
Music control：

Button 1/2：set sound source on/stop

Button 3/4：select previous/next play list

Button 5/6：select previous/ next song

Button 7/8：reduce/increase sound
or to select the DLP panel.
or , can change DLP panel's page.
Remote controller's buttons, those No.1
5