Rule 1: The Code 128 Scanning Rule
Step
Bar Code
1
Begin New Rule
2
Code 128
3
Send next 5 characters
4
Send <CTRL M>
5
Send next 5 characters
6
Send <CTRL P>
7
Send next 2 characters
8
Send <CTRL D>
9
Save Rule
Rule 2: The UPC Scanning Rule
Step
Bar Code
1
Begin New Rule
2
UPC/EAN
3
Send all remaining data
4
Send <CTRL M>
5
Save Rule
To correct any errors made while entering this rule, scan the Quit Entering Rules bar code on
is already saved, scan the Erase Previously Saved Rule bar code on
Alternate Rule Sets
ADF rules may be grouped into one of four alternate sets which can be turned on and off when needed. This is
useful to format the same message in different ways. For example, a Code 128 bar code contains the following
information:
Class (2 digits), Stock Number (8) digits, Price (5 digits)
The bar code might look like this:
245671243701500
where:
Class = 24
Stock Number = 56712437
Price = 01500
Ordinarily, data is sent as follows:
24 (class key)
56712437 (stock key)
01500 (enter key)
But, when there is a sale, send only the following:
24 (class key)
56712437 (stock key)
On Page
Beep Indication
12-5
High High
12-8
High High
12-22
High High
12-44
High High
12-22
High High
12-44
High High
12-21
High High
12-42
High High
12-5
High Low High Low
On Page
Beep Indication
12-5
High High
12-9
High High
12-21
High High
12-44
High High
12-5
High Low High Low
page
Advanced Data Formatting 12 - 3
page
12-6. If the rule
12-6.