Tips - Marantz M-CR511 Owner's Manual

Contents Connections

Tips

Simple operations in the power off state
When a input source select buttons, 1/3 button or FAVORITES CALL button is pressed, the operation is performed at the same time as the unit
0
switches on. ("Basic operation" (v p. 29), "Favorite function" (v p. 39))
When the "Network Control" is set to "On", you can perform playback, or other operations through AirPlay, "Marantz Hi-Fi Remote". (v p. 84)
0
Simple operations for iPod/USB
When connected to the Front USB port, the Input Source automatically changes and playback begins. ("Listening to music on an iPod" (v p. 42),
0
"Playing files stored on USB memory devices" (v p. 46))
I only want to recharge my iPod
Connect the iPod to this unit when the unit power is on. Then turn the unit power off, and the iPod will continue to charge until fully charged. (v p. 44)
0
When connected to the Rear USB port, the iPod can be charged without the current Input Source changing.
0
Specifying the iPod track with the alarm function
Connect the iPod to this unit by USB and then press the MODE button to register your favorite tracks in the favorites using "On-Display"
0
mode. (v p. 39) Then set a track registered in the favorites as the alarm. (v p. 77)
When using alarm playback on an iPod touch or iPhone, set the iPod touch or iPhone to "Sleep" mode. If the power is switched off using the power off
0
operation, alarm playback cannot be used.
Specifying the desired track with the alarm function
After registering the desired track in NAS, etc., register the track in the favorites and then specify the track in the alarm settings. (v p. 77)
0
Change to summer time
Select "General" - "Clock" in the setup menu and configure the settings. (v p. 78)
0
Front/Top
Rear panel
panel
Playback Settings
Remote control 93
unit
Tips
Index
Appendix