Appendix; Music Files On Pc Or Nas Cannot Be Played Back - Marantz M-CR511 Owner's Manual

Contents Connections
o Music files on PC or NAS cannot be played back
Symptom
Files stored on a computer
0
cannot be played.
0
0
0
Server is not found, or it is
0
not possible to connect to
0
the server.
0
0
Music files on PC cannot
0
be played back.
Files on PC or NAS are not
0
displayed.
Music stored on a NAS
0
cannot be played.
0
0
Front/Top
Rear panel
panel
Playback
Files are stored in a non-compatible format. Record in a compatible format.
You are attempting to play a file that is copyright protected. Files that are copyright protected cannot be
played on this unit.
The set's USB port cannot be used for connection to a computer.
Media sharing settings are not correct. Change media sharing settings so that the unit can access the
folders on your computer.
The computer's or router's firewall is activated. Check the computer's or router's firewall settings.
Computer's power is not turned on. Turn on the power.
Server is not running. Launch the server.
Set's IP address is wrong. Check the set's IP address.
Even if PC is connected to the USB port on this unit, music files on it cannot be played back. Connect PC
to this unit through the network.
Files of a type not supported by this unit are not displayed.
If you use a NAS in conformity with the DLNA standard, enable the DLNA server function in the NAS
setting.
If you use a NAS that does not conform with the DLNA standard, play the music via a PC. Set Windows
Media Player's media sharing function and add NAS to the selected play folder.
If connection is restricted, set audio equipment as the connection target.
Remote control
unit
Settings
Cause / Solution
105
Index
Tips

Appendix

Page
110
－
－
36
－
－
－
84
24
110
－
36
－