Installing The Multipurpose Blade Or Dough Blade - KitchenAid KFP1330 Instructions Manual

aSSEMblINg ThE FOOd PROCESSOR
With the work bowl installed, slide the
3
drive adapter onto the power shaft.
TIP: You may need to turn the disc/drive adapter until it drops down into place.
Installing the multipur_pose blade or_ dough blade
Place the blade on the power shaft.
1
Rotate the blade so it falls into place on
the power shaft.
Install the work bowl cover, being sure
3
it locks into place.
12
Install the work bowl cover, being sure
4
it locks into place.
Push to lock: Press down firmly on the
2
multipurpose blade until it is down as
far as it will go. The multipurpose blade
features an internal seal that fits tightly
over the center of the work bowl.