Table of Contents
Advertisement
Administrating the Device
42
Firmware Upgrade
The device supports new firmware upgrade (the software that controls the operation in the
device). Please contact your dealer for the latest version if necessary.
Download the latest firmware file from our website or your dealer. Unzip this firmware file to
binary file and store it into your PC. Then follow the steps as bellow carefully:
1.
Close all other application programs which are not necessary for firmware update.
2.
Make sure that only you access this device while firmware updating.
3.
Disable all event trigger and/or schedule trigger functions first.
4.
In this web page, click "Browse" button. Select the Firmware binary file.
5.
Once the firmware file was selected, click "Firmware Upgrade" button.
6.
The upgrade progress information will be displayed. Once the uploading process
completed, the device will reboot the system automatically.
7.
Please wait for timer countdown, and then you can use IPWizard II to search the device
again.
Warning!!!
The download firmware procedure cannot be interrupted. If the power
and/or network connection are broken during the download procedure, it WILL cause serious
damage to the device.
Strongly suggest that DO NOT upgrade firmware via Wireless LAN due to high error rate
possibly and don't allow any other clients to access this unit during updating procedure.
Be aware that you SHALL NOT turn off the power during updating the firmware and wait for
finish message.
Furthermore, the firmware upgrade procedure is always risky and do not try to upgrade new
firmware if it's not necessary.
Advertisement
Table of Contents
