POWER NETWORK iPCAM-WI Camera iPCAM-PT Pan and Tilt Camera 800-02577-iPcams 2/10 Rev. A...
Cameras Online Help Guide This guide covers the operation of Honeywell's iP Cameras for use with the Total Connect website. The various cameras each have different features that can be controlled from the Total Connect website. When a particular camera is selected, only the operating switches for that model camera will appear.
iP Cameras Online Help Guide On the right, thumbnail still pictures for each camera will appear. These thumbnails are updated every 10 to 20 seconds. You may select a camera to view its live video by clicking on that camera. The live video appears on the left.
iP Cameras Online Help Guide This dedicated camera viewing window provides a larger live video view. The tool buttons available will depend on the iP camera model. For a detailed description of each button's function, refer to the "Tool Buttons" topic that follows. When your session is over, in the video monitoring window click Close then log out of Total Connect.
iP Cameras Online Help Guide Tool buttons Button Function How the camera's "Home" position is determined. • If no video detection areas have been set up, the camera's home position is centered in its vertical and horizontal axis. • If a video detection area has been set up, that view now becomes the home position. •...
iP Cameras Online Help Guide Edit camera settings Note, that the settings for each camera are configured separately. On each camera preview window there is a tool icon in the lower right corner, click this icon to bring up the camera's Camera Configuration window. It is important to know that configuration settings are stored in the camera and are retrieved when a video session is opened.
iP Cameras Online Help Guide Group or Item Function Features Pan/Tilt Speed – Allows choosing the camera panning speed. Note, a slower speed will give clearer video. Status LED Operation – Uncheck this box to turn off the camera's status LEDs for stealth operation.
iP Cameras Online Help Guide Edit Detection Areas window When an area is activated by checking the box, a transparent colored Detection Area will appear on the screen. You can drag and resize the box as desired. Click Done when all the areas are configured. Motion detected in any area will trigger a video...
TRADEMARKS Honeywell is a registered trademark of Honeywell International Inc. Flash is a registered trademark of Adobe Systems Incorporated, registered in the U.S. and other countries. QuickTime is a registered trademark of Apple Inc., registered in the U.S. and other countries.