Honeywell 720P User Manual page 29

Honeywell
MAC address
Displays the Ethernet MAC address of the device. Note that user can not modify it.
Obtain IP address automatically (DHCP)
DHCP: Stands for Dynamic Host Configuration Protocol.
Enable this checked box when a DHCP server is installed on the network to issue IP address
assignment. With this setting, the IP address is assigned automatically. If this device can not
get an IP address within limited tries, the device will assign a default IP address,
192.168.0.100, by itself as the default IP address.
IP address, Subnet mask, and Gateway
If you do not select Obtain an IP address automatically, then you need to enter these
network parameters manually.
Obtain DNS from DHCP
DNS: Stands for Domain Name System.
Enable this checked box when a DHCP server is installed on the network and provide DNS
service.
Primary DNS and Secondary DNS
If you do not select Obtain DNS from DHCP, then you need to enter these parameters
manually.
HTTP Port
The device supports two HTTP ports. The first one is default port 80 and this port is fixed.
This port is very useful for Intranet usage. The second HTTP port is changeable. Users could
assign the second port number of http protocol, and the WAN users should follow the port
number to login. If the http port is not assigned as 80, users have to add the port number in
back of IP address. For example: http://192.168.0.100:8080.
23