Step 4 - Set Time Zone/Daylight Savings Time - Uniden APPCAM 24HD Owner's Manual

3. Scroll to WiFi on the Advanced Settings list.
For Android: Tap Manage WiFi network and
then scroll to the router you want. Enter
the password for that router. Unplug the
Ethernet cable if it is connected.
For iOS: Tap SSID. Select your router from
the drop-down list and enter your router's
password. Tap Connect.
The camera will reboot and reconnect to the router. Watch the front
of your camera. Wait until the LED returns to the steady on state to
continue.
4. If the screen indicates that the camera is
disconnected, tap the System icon and then
the Refresh icon. The camera refreshes and
reconnects to the router you chose.
5. Tap the screen to display video.

STEP 4 - SET TIME ZONE/DAYLIGHT SAVINGS TIME

It is important to set the correct time zone and daylight savings time indication
on your camera to ensure correct date/time stamp on the video files.
1. Access the Advanced Settings list (see Connect Camera to Internet,
described previously).
2. From the Advancd Settings list, scroll to Time Zone.
3. Select your time zone. The most commonly used time zones are:
GMT-05:00 - Eastern Standard
ͳ
12
Android and iOS screens
are similar.
Android
iOS