Setting Up The Equipment; Set Up The Monitor; Mount The Camera Stand - Uniden G24 Series Owner's Manual

SETTING UP THE EQUIPMENT

Set Up the Monitor

1. If you are using the Monitor as a stand-alone unit, flip out the stand on the back of the Monitor,
and extend the antenna. Connect an AC adaptor to the power input on the side of the Monitor.
If you are using the Monitor in the cradle, insert the Monitor into the cradle and connect an AC
adaptor to the input on the back of the cradle.
2. Connect the other end of the adaptor to a 240 volt AC (standard indoor) power outlet.
3. Press and hold the
4. The Monitor displays the Uniden Welcome screen for a few seconds and then transitions to the
LIVE view.
The screen remains dark until the cameras are powered up.

Mount the Camera Stand

General Guidelines
The G Series outdoor camera is weatherproof and has an IP66 rating. Water can be sprayed on them
and they will still work; however, the cameras cannot be submerged underwater.
Although the outdoor cameras can be exposed directly to the rain, it is recommended that, if they
are used outdoors, they be mounted under some type of cover like a patio overhang or eave. As
rainwater drops start to dry on the camera glass, it can create spots that will reflect the light from
the infrared LEDs used for night vision, thus lowering the quality of the video.
The G Series indoor camera is not weatherproof.
Also, as dust, grime, and cobwebs accumulate on the camera glass, they can reflect light from the
infrared LED and might lower video quality. Periodically clean the lens glass with a soft cloth.
8
button on the top of the Monitor for 3 - 4 seconds to power it up.
POwER