Mounting The Plate And Camera; Set Time Zone/Daylight Savings Time - Uniden Guardian App Cam 26 Owner's Manual

Your camera will reboot and reconnect to the router. If using the
wired set up process, unplug the Ethernet cable from the router
and camera during the reboot process. Wait 2 - 3 minutes until
the camera runs through the Pan/Tilt mode and the LED returns
to the steady on state to continue.
4. The camera screen indicates that it is disconnected. Tap the System
icon and then the Refresh icon. The camera refreshes and reconnects
to the router you chose. The app displays a snapshot of the video
image.
At this point, the green LED is steady on.

MOUNTING THE PLATE AND CAMERA

1. Hold the mounting plate where you want to mount
it and mark the location of the screw holes.
2. Use the included screws and anchors to attach
the mounting plate to the
wall.
3. Use the enclosed screws
to screw the camera to the
bracket.

SET TIME ZONE/DAYLIGHT SAVINGS TIME

It is important to set the correct time zone and daylight savings time
indication on your camera to ensure correct date/time stamp on the video
files.
1. Access the Advanced Settings list (see Connect Camera and WiFi
Router, described previously).
2. From the Advanced Settings list, scroll to Time Zone.
3. Select your time zone.
4. Set the Daylight Savings Time indicator.
5. Tap Back, and exit the Advanced Settings list.
10