Utax CD 1218 Instruction Handbook Manual page 49

Basic Operation
1 Set the original.
2
Press the Duplex key.
3 Press the
duplex copy mode.
4 Press the Enter key.
If you have selected 1 sided->2 sided, proceed to the next step.
If you have selected 2 sided->2 sided or Book->2-sided, proceed to step 7.
5
Press the
finished stitch side.
6 Press the Enter key.
7 Press the Start key. Scanning of the original starts.
If the originals have been set in the optional document processor, copying starts automatically.
If the original has been set on the platen, a message prompting replacement of the original is
displayed. In this case, proceed to the next step.
8 Replace the original and press the Start key. Scanning of the original starts.
9 If no original remains, press the Enter key. Copying starts.
3-8
key or the key to select the desired
key or the key to select the desired
Duplex/Split Page:
1 sided 2 sided
2 sided
2 sided
Book 2-sided
Saddle Stitch Direction:
Left side
Top side