Replacing The Toner Container And The Waste Toner Box - Utax CD 1218 Instruction Handbook Manual

Replacing the Toner Container and the Waste Toner Box

When message Unable to copy. Please Add
Toner [Cannot copy. Add toner, resume
copying.] is displayed on the message display and
the machine stops, add toner. Replace the toner
container together with the waste toner box.
Notes
Add toner only when Add Toner is displayed on the message display.
Whenever the toner container is changed, be sure to carry out the procedure described from step 7
on page 5-7 through step 11 on page 5-8. If any section is left dirty, the performance of this product
cannot be maintained.
1
Open the front cover.
2 While pushing the waste toner box holder to the left,
remove the waste toner box.
Important!
Do not invert the old waste toner box.
Do not attempt to incinerate the toner container or the waste toner box. Dangerous
sparks may cause burns.
Do not attempt to force open or destroy the toner container or the waste toner box.
Unable to copy.
Please Add Toner
100%
Caution
Caution
Maintenance
Auto
10
5-5