Table of Contents
Advertisement
Checking IP Address of Your Computer In Windows XP
Sometimes you will need to know the IP address of the computer tha t you are using.
For example, when you want to make sure that your computer is in the same network
domain as that of your Access Point for you can configure and access the AP.
Go to Start menu >
Run > type
"command"
Click "OK"
When the command prompt window appears, type command "ipconfig /all" and press
Enter. This command will display the IP addresses of all the network adapters in
your computer.
In this case, the IP address of your network adapter is 192.168.0.23, which means
your Access Point must have an IP address of 192.168.0.xxx in order for you to be
able to access it.
If the IP address is assigned by DHCP server on the network, there are chances you
might have to release the IP and acquire it from DHCP server again. Here is how
you do it.
46
Advertisement
Table of Contents
