Table of Contents
Advertisement
Basic Setting
This is the page where you can change the basic settings of the Access Point with the
minimum amount of effort to adjust a secure wireless network.
AP Name: Name of the AP, which can be used to identify the Access Point among the
all the Access Points in the wireless network.
SSID: Service Set Identifier, which is a unique name shared among all clients and
nodes in a wireless network. The SSID must be identical for each clients and nodes in
the wireless network.
Channel: The value of channel that AP will operate in. You can select the channel
range of 1 to 11 for North America (FCC) domain, 1 to 13 for European (ETSI)
domain and 1 to 14 for Japanese domain.
WEP Key: To disable WEP security, click on the "Disable " option. To enable WEP
security, there are 3 type of WEP keys to choose from, 64bits, 128bits and 256bits.
When one of the 3 WEP key options is selected, you must enter the value of one of
the four Keys in ASCII or HEX format. You can also enter the values for all four WEP
keys, and select one to use.
Note!
When AP's WEP security is enabled, all the wireless clients that wish to
connect to the Access Point must also have WEP enabled with the identical WEP Key
value entered.
12
Advertisement
Table of Contents
