Documentation; Rf Manager Hardware; Lcd Display - HP MSM415 Hardware Installation

Hardware Installation

RF Manager Hardware

Documentation

This guide describes how to install and perform the initial setup of the RF Manager IDS/IPS
Controller and the MSM415 RF Security Sensor. See also, the following documentation:
„
HP ProCurve RF Manager and Sensors Management and Configuration Guide
„ MSM320 Quickstart, for installation and initial configuration information on the MSM325 and
MSM320. For regulatory information see the HP ProCurve MSM3xx / MSM4xx Access Points
Management and Configuration Guide.
„ MSM335 Quickstart, for installation and initial configuration information on the MSM335
Sensor. For regulatory information see the HP ProCurve MSM3xx / MSM4xx Access Points
Management and Configuration Guide.
All documentation is available on the HP ProCurve Manuals web site:
www.hp.com/go/procurve/manuals
RF Manager Hardware
Power, Fault, and Locator LEDs
Console port
Figure 1. Front view of the RF Manager Controller

LCD Display

Figure 2. RF Manager Controller LCD Display
1-2
LCD display Keypad USB port
Port 1 Port 2
Ethernet LEDs