Russell Hobbs RHSB250 Instruction Manual page 14

shaker to shake out the food.
 Once finished, clean the dry mill well. For example, should you process herbs or nuts,
then move on to grinding coffee without cleaning in between, you may find that the
taste of your coffee will be affected. A nice tip to thoroughly clean your mill after each
use, is to process dry rice through it.
▲NOTE: To ensure the longevity of your machine, please do not use it continuously
for more than 3 (three) minutes. Let the motor cool down for at least 10 (ten) minutes
before its next operation.
USING THE GLASS JUG BLENDER
Use the blender jug for blending soups, sauces, smoothies and cocktails. Why not try
making mayonnaise, hollandaise, breadcrumbs and pesto!
 Fit the sealing ring into the blade base and ensuring the seal is located correctly. The
blender will leak if the seal is damaged or not fitted correctly.
 Screw the jug onto the blade base.
 Put your ingredients into the jug. Max. 600 g food and 0.9L of water is to be use.
 Put the filler cap in the lid, then turn.
 Turn the lid in a clockwise direction to lock onto the jug (fig.9).
 Place the blender onto power unit/ base and turn to lock (fig.10).
 Select a speed or use the pulse control.
 Don't move the jug, lid or filler cap whilst the machine is ON and processing.
.
▲NOTE: Do not use the jug without fitting the lid.
▲The cutting blades are very sharp. Handle the blender with extreme care and
caution.
▲Do not operate the blender accessory empty for more than 1 (one) minute.
▲Never fill the glass jug with boiling liquid. Allow liquids to cool down to ambient
room temperature.
▲To ensure the longevity of your machine, please do not use it continuously for more
than 3 (three) minutes. Let the motor cool down for at least 10 (ten) minutes before
its next operation. By not following this caution, the appliance could overheat