Speed Control - Russell Hobbs RHSB250 Instruction Manual

SPLASHGUARD
The mixing bowl should be used with the splashguard. It is recommended to use the
mixing bowl with the splashguard fitted to avoid spatter. To fit the splashguard, place it on
top of the mixing bowl and turn it until the small latches, sit comfortably locked into the
latches of the mixing bowl.
POWER UP
▲Caution: - If the speed control is not set to '0' (off position), the kitchen machine
will start when the power supply is connected. Please fit accessories correctly to
avoid damaging the machine.
 Check that the speed control is set to "0".
 Put the plug into the wall power outlet and switch it on.
 Remove the motor drive cover and place it onto the drive that will not be used at that
time.
▲NOTE: The cover, when using the high-torque drive, should be locked onto the
high-speed drive by turning it clockwise. When using the high-speed drive,
remove the cover by turning it anti-clockwise and place it on the high-torque drive
to avoid liquids and food materials from splashing into the motor.

SPEED CONTROL

 Turn the speed control clockwise to the speed you want.
 Turn the speed control back to "0" to turn the motor off.
 Turning the speed control anti-clockwise to "P" will give you a pulse at high speed.