Table of Contents
Advertisement
Mounting Instructions
The 3GSDI to HDMI Converter can be mounted on any flat surface using the included
mount or on a camera tripod. Mounting screws are not included.
1.
Remove the two screws on the bottom of the unit.
2.
Place the included mount, as shown, so that it rests between the two flanges.
Note that the mount can be placed in either direction, as shown by the arrows.
3.
Replace the two enclosure screws and tighten to secure the mount to the unit.
4.
Mount the unit, as shown (screws not included).
For installation on a drywall surface, use a #6 drywall screw. When installing, it is
recommended to thread the drywall screws into a stud.
Flat Surface
page | 12
Advertisement
Table of Contents
