Table of Contents
Advertisement
ID
Name
1
USB
2
SDI In
3
DIP switches
4
Power
5
HDMI Out (Indicator)
6
HDMI Out
7
12V DC
Description
This mini-USB port is used for upgrading
the firmware.
Connect a BNC cable from the SDI source
to this port.
Use these DIP switches to set the
operating mode of the converter.
See
DIP Switches (page 8)
information.
When the 3GSDI to HDMI Converter is
powered, this LED indicator will glow solid
blue. When power is disconnected, this
LED indicator will turn off.
This LED indicator will glow solid green
when an HDMI cable is connected to
the HDMI port. If the HDMI cable is
disconnected, then this LED indicator will
turn off.
Connect an HDMI cable from this port to an
HD display.
Connect the included 12V DC power supply
to this power receptacle.
page | 3
Introduction
Page Title
for more
Advertisement
Table of Contents
