Door Tension Adjustment; Final Check List - Thermador DW244UB Installation Instructions Manual

Door Tension Adjustment

After installation of the dishwasher open and close the
door several times. The door should open and close
easily with very little force required to lift the door
when fully open. If the door closes too quickly, or if the
door falls open the spring tension should be adjusted.
Refer to Figure 20.
Figure 20.

Final check list

CHECK ELECTRICAL REQUIREMENTS. BE SURE
YOU HAVE CORRECT ELECTRICAL SUPPLY AND
RECOMMEDNED GROUNDING METHOD.
Turn on the hot water shut-off valve and electrical supply.
Inlet water temperature should be 140°F (60°C).
Operate the dishwasher through one cycle and check
for plumbing leaks.
If the dishwasher does not operate refer to the SELF-
HELP and the SERVICE and REPAIR sections in the Care
and Use Manual.
LEAVE INSTALLATION INSTRUCTIONS
AND CARE & USE MANUAL WITH OWNER.
9