1000Base-X Sfp Interface Status Led - HP V1910 Series Getting Started Manual

Switch model
HP V1910-24G-PoE
(170W) Switch JE008A
HP V1910-24G-PoE
(365W) Switch JE007A

1000Base-X SFP interface status LED

NOTE:
For the HP V1910-24G-PoE (170W) Switch JE008A and HP V1910-24G-PoE (365W) Switch JE007A,
the port mode switching button does not take effect for the 1000Base-X SFP interface LEDs.
Table 11 1000Base-X SFP interface status LEDs description
SFP interface status LED
Solid green
Blinking green
Off
Port
mode Ethernet port status LED
LED
On
Green Fast blinking
Solid
Off
green
(rate
On
mode)
Yellow Fast blinking
Off
On
Blinking at 3
Green
Hz
Blinking
green
(PoE
mode)
Off
On
Yellow
Off
Meaning
The port operates at a rate of 1000 Mbps
The port is transmitting data at 1000 Mbps
The LED is fast flashing when data is being received on the port.
No link is present on the port.
11
Meaning
The port operates at a rate of 1000
Mbps.
Data is transmitted or received at a rate of
1000 Mbps.
The port is not up or does not operate at
1000 Mbps.
The port operates at a rate of 10/100
Mbps.
Data is transmitted or received at a rate of
10/100 Mbps.
The port is not up or does not operate at
10/100 Mbps.
PoE power supply is normal.
Power consumption of the device
attached to the port exceeds the upper
limit of the power supply consumption of
the port, or the available power of the
switch is not enough for power supply of
the port.
No PoE power supply is provided on the
port.
The device connected to the interface is
not a PD device or a PoE failure occurs
No PoE power supply is provided on the
port or PoE power supply is normal.