13. SELECTING AND PREPARING WELD OUTPUT
CABLES
1. Weld output cable.
Determine total cable lenght in weld circuit and maximum welding amperes.
Use shortest cables possible.
Do not use damaged cables.
2. Welding socket: Negative connection CC-WORK.
3. Welding socket: Positive connection CV-WORK.
4. Welding socket : Positive connection.
2-3-4) Use lugs of proper amperage capacity and hole size for connecting to work clamp.
5. Insulated electrode holder.
6. Wire feeder
Install according to manufacturer's instructions.
7. Work clamp.
Install onto work cable.
ref. T300KT.TIF
26