Table of Contents
Advertisement
Time-setting options
en
To change the type of heating, first press the l Start/
Stop button to interrupt the operation and then touch
the ! field. The first type of heating appears with the
corresponding default temperature. Use the rotary
selector to change the type of heating.
When you change the type of heating, the other
Note:
settings are also reset.
Directly selecting types of heating
You can select certain types of heating directly using
the touch fields. This makes the appliance even easier
and faster to set.
The types of heating that can be set directly are:
< 4D hot air
■
% Top/bottom heating
■
. Hot air eco
■
( Grill, large area
■
Applying settings
Touch the field with the required type of heating.
1.
The temperature is immediately highlighted white.
Set the temperature or grill setting using the rotary
2.
selector.
Press the l Start/Stop button to start.
3.
The appliance begins to heat up.
Rapid heating
With Rapid heating, you can shorten the heat-up time
for some heating types.
Heating types suitable for Rapid heating are:
< 4D hot air
■
% Top/bottom heating
■
To ensure an even cooking result, do not place your
food in the cooking compartment until Rapid heating is
complete.
Adjusting settings
Ensure you have selected a suitable heating type and
set a temperature of at least 100 °C. Otherwise, Rapid
heating cannot be activated.
Set the heating type and temperature.
1.
Touch the F field.
2.
The symbol lights up red. A confirmation note appears
on the display.
When Rapid heating comes to an end, an audible
signal sounds and a note appears on the display. The
symbol is no longer lit up. Place your dish in the
cooking compartment.
The "cooking time" time-setting option starts at
Note:
the same time as Rapid heating. Therefore, only set a
cooking time when Rapid heating has come to an end.
Cancelling
To cancel Rapid heating, touch theF field again. The
symbol is no longer lit up.
14
OTime-setting options
Your appliance has different time-setting options.
i o n s
T i m e - s e t t i n g o p t
Time-setting option Use
Cooking time
After the set cooking time has elapsed, the
q
appliance ends the operation automatically.
End
Enter a cooking time and the required end
r
time. The appliance starts automatically so
that the operation ends at the required time.
Timer
The timer functions like an egg timer. It runs
t
independently from the operation and the
other time-setting options. After the set time
has elapsed, the appliance does not switch on
or off automatically.
You can call up the cooking time and the end time after
setting a operation using the s field. The timer has a
separate t field and can be adjusted at any time.
A signal sounds after a cooking time or timed period
has elapsed. You can cancel the signal early by
touching the s field.
You can change how long the signal sounds for
Note:
in the basic settings. ~ "Basic settings" on page 17
Setting the cooking time
You can set the cooking time for your dish on the
appliance. This means that the cooking time is not
unintentionally exceeded and you do not need to
interrupt other work in order to end the operation.
Applying settings
Depending on which direction you turn the rotary
selector first, the cooking time starts at a particular
default value: Left = 10 minutes, right = 30 minutes.
The cooking time can be set in one-minute increments
up to one hour, and then in five-minute increments.
The maximum setting is 23 hours and 59 minutes.
Example in the picture: Cooking time of 45 minutes.
Set the type of heating and temperature or level.
1.
Touch the s field before starting.
2.
The cooking time is highlighted white in the display.
Turn the rotary selector to set the cooking time.
3.
The value is applied after a few seconds, or touch
the s field twice. The cooking time is shown in the
display under the type of heating and temperature or
level.
Hide quick links:
Advertisement
Table of Contents
