Safety Instructions For Installation - Miele KM 2312 Operating And Installation Instructions

This appliance must be installed
and connected to services by
authorised personnel to the
requirements of AS 5601, wiring
rules, local and national authority,
gas, electricity, building, other
relevant statutory regulations and
the manufacturer's instruction.
Fit the wall units and rangehood
before fitting the cooktop to avoid
damaging the surface.
~
This cooktop is not suitable for
installation and operation with
aftermarket lids or covers fitted.
~
The room in which the gas cooktop
is installed must be at least 20 m
size with a door or window in it which
can be opened to the outside air.
~
The veneer or laminate coatings of
worktops (or adjacent kitchen units)
must be treated with 100 °C
heat-resistant adhesive which will not
dissolve or distort.
Any backmoulds must be of
heat-resistant material.
~
This appliance must not be installed
and operated in mobile installations
(e.g. on a ship).
~
An electric fryer must not be
installed directly next to a gas cooktop,
as the gas flames could ignite the fat in
the fryer. It is essential to maintain a
distance of at least 300 mm between
these two appliances.

Safety instructions for installation

~
A gas cooktop may not be built in
over a fridge, fridge freezer, freezer,
dishwasher, washing machine or
tumble dryer.
~
Ensure that the gas pipe and
electrical cable are installed in such a
way that they do not touch any parts of
the appliance which become hot. This
could cause damage.
~
The electrical cable and any flexible
gas connection pipes must be installed
in such a way so that they do not come
into contact with any moving kitchen
parts (e.g. a drawer), and cannot
become trapped.
~
Observe carefully the safety
distances given on the following pages.
~
Do not use any sealant except
3
in
where expressly instructed to do so.
The seal underneath the appliance
provides a sufficient seal for the
worktop.
All dimensions in this instruction booklet
are given in mm.
31