Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Siqura CD810F1
Summary of Contents for Siqura CD810F1
- Page 1 Siqura CD810F1 Compact Fixed Dome IP Camera Installation Manual...
-
Page 2: Table Of Contents
Connect the Ethernet cable ..................8 System requirements ......................10 Access the camera ......................11 Connect via web browser................... 11 Connect via Siqura Device Manager ................11 Change network settings ................... 12 Log on to the camera ....................13 Siqura Viewer ......................13 Home page ........................ -
Page 3: Overview
Overview The CD810F1 can provide real-time video streaming and smooth image quality. The camera offers MJPEG streaming and also includes an H.264 encoder for high-resolution digital broadcast applications. With its compact and sophisticated mechanical design, the CD810F1 camera is easily installed and aesthetic in appearance. -
Page 4: Package Contents
Package contents CD810F1 Security torx Barrel connector adapter Self-tapping screw (x3) Plastic screw anchor (x3) Quick Start Guide Software and manuals NOTE: The supplied self-tapping screws are for soft substances / materials such as wood. For other installation environments, such as cement wall, it is required to pre-drill and use plastic anchors before fastening the supplied self-tapping screws to the wall. -
Page 5: Dimensions
Dimensions Power and Ethernet connectors No. Connector Definition RJ-45 For network and PoE connection Power Jack (DC 12 V) Power connection... -
Page 6: Install The Camera
Install the camera Step 1: Loosen the two security screws of the camera and detach the dome cover. Step 2: Place the camera at the installation location. Then attach the camera to the ceiling by fastening it with the supplied screws through the screw holes. -
Page 7: Connectors
Connectors Item Description Press the button with a proper tool for at least 20 seconds to restore the system to the factory-default Reset Button settings. Lens Rotate the lens right/left to adjust focus Focus Fixed Screw Loosen the screw to adjust the lens Loosen the screw to adjust tilt angle Tilt Fixed Screw For video recording storage... -
Page 8: Camera Cabling
Camera cabling Before you connect cables, make sure that all cables and the power adapter are placed in dry and well-waterproofed environments, such as waterproof boxes. The purpose is to prevent moisture accumulation inside the camera and moisture penetration into cables, which might lead to camera breakdown. Follow the instructions below to complete the IP camera connection. - Page 9 Connect one end of the Ethernet cable to the RJ-45 connector of the indoor camera, and plug the other end into a PoE switch. Check the status of the link indicator and the activity indicator LEDs. If the LEDs are unlit, check the LAN connection. A green link light indicates a good network connection.
-
Page 10: System Requirements
System requirements To control the IP camera via a web browser, connect the camera to a PC over the network and meet the system requirements as described below. Items System Requirement ® ® Personal computer 1. Intel Pentium M, 2.16 GHz or ®... -
Page 11: Access The Camera
Access the camera You can log on to the webpages of the CD810F1 from a PC which is on the same subnet as the camera. You can open the login page directly from your web browser or use Siqura Device Manager to access the camera. -
Page 12: Change Network Settings
Change network settings With Siqura Device Manager, you can directly change the network settings of the CD810F1. To assign a static IP address 1. Go to the list of detected devices, and then right-click the entry for the CD810F1. 2. Click Change Network Settings. -
Page 13: Log On To The Camera
Log on to the camera Users with a valid account for the CD810F1 can log on to the camera. To log on 1. In the Authentication box, log on with the account that was created for you. User name and password are case sensitive. -
Page 14: Home Page
Note that function buttons will vary depending on the camera model. For a description of the CD810F1 webpages, see the User Manual on the supplied Siqura Product CD (download the latest version at www.siqura.com). -
Page 15: Set Up Video Resolution
Set up video resolution Users can set up the video resolution on the Video Format page of the browser-based configuration interface. Video Format can be found under this path: Streaming> Video Format. The default values of video resolution are as below. H.264- 1920 x 1080 (13/15 fps) + H.264- 720 x 480 (13/15 fps) H.264- 1920 x 1080 (25/30 fps) + H.264- 720 x 480 (25/30 fps) Real-time... -
Page 16: Export/Import Configuration Files
Export/Import configuration files To export/import configuration files, users can access the Maintenance page on the browser-based configuration interface. The Maintenance settings can be found under this path: System> Maintenance. Users can export configuration files to a specified location and retrieve data by uploading an existing configuration file to the IP camera. -
Page 17: Tech Support Information
This chapter explains how to delete a previously installed Siqura Viewer from the PC and how to set up the Internet security. Note: For the technical specifications of the camera, refer to the CD810F1 datasheet. Delete the existing Siqura Viewer Viewing camera images in the CD810F1 webpages requires Siqura Viewer software. -
Page 18: Set Up Internet Security
Set up Internet Security If ActiveX control (Siqura Viewer) installation is blocked, set the Internet security level to default or change the ActiveX controls and plug-ins settings. To set the Internet Security level to default 1. Start Internet Explorer (IE).
Need help?
Do you have a question about the CD810F1 and is the answer not in the manual?
Questions and answers