Brother PDS-5000 User Manual page 45

®
Scan (Windows )
X-Offset / Y-Offset / Width / Length / Center
When you select Fixed Area (Deskew OFF) from the Cropping drop-down list, you can adjust the scan area
manually using the following values:
 X-Offset
Adjust the distance from the left edge of the scanner to the left edge of the area in the document that you
want to scan.
 Y-Offset
Adjust the distance from the top edge of the document to the top edge of the area in the document that
you want to scan.
 Width
Adjust the width of the area in the document that you want to scan.
 Length
Adjust the length of the area in the document that you want to scan.
 Center
Allow the software to automatically center the scanned image based on the selected paper size.
OverScan / Adjustment
OverScan (Adjustment) allows you to add a specific margin at top and bottom of the edge of the image.
This is used to reduce possible corner clipping on skewed images and is often applied to a batch of skewed
documents.
Select a value between 0 and 4.5 mm.
Background Setting
Select White Background or Black Background from the drop-down list to set the background color for your
scanned images.
NOTE
This option is available only when you select Automatic (Deskew ON) in the Cropping drop-down list.
Unit
Select Millimeters, Inch, or Pixel from the drop-down list. The default setting is based on your OS language.
Reload Timeout
Set the amount of time the scanner will wait before auto-scanning the next document after a scan job is
completed. Use this feature if you load many separate documents in the ADF that must be scanned using
the same scan settings.
5
40