Load Documents Using The Carrier Sheet - Brother PDS-5000 User Manual

Scan Preparation

Load documents using the Carrier Sheet

The Carrier Sheet is an optional item that you can use with your scanner. To purchase a Carrier Sheet, see
For Brother accessories & supplies on page 123.
IMPORTANT
• Do not write on the Carrier Sheet, as the writing may be seen in scanned documents. If the Carrier Sheet
becomes dirty, wipe it with a dry cloth.
• Do not leave documents in the Carrier Sheet for extended periods of time, as the printing on the
documents may bleed through onto the Carrier Sheet.
• Do not place the Carrier Sheet in direct sunlight or in an area subject to high temperatures and high
humidity, as the Carrier Sheet may warp.
• Do not place large or heavy objects on the Carrier Sheet when it is lying flat.
• Do not bend or pull the Carrier Sheet. If it becomes damaged, it may not be acceptable for scanning, and
should not be used.
• Do not scan multiple Carrier Sheets in a row.
a
Insert the document into the Carrier Sheet.
NOTE
• Set the document in the center of the Carrier Sheet and align the top of the document with the top of the
Carrier Sheet.
• To avoid document jams, do not put several small documents into the Carrier Sheet at the same time.
Insert only one document into the Carrier Sheet at a time.
4
13