Brother PDS-5000 User Manual page 59

®
Scan (Windows )
Cache
This option allows you to assign a specified amount of memory from the available RAM to process the image
data. By specifying a smaller memory size, you free more memory for other applications you are running.
By specifying a larger memory size, you have more memory to process the image data, which is useful
especially when you have a large amount of documents to scan.
None

Select None from the Mode drop-down list to specify the number of pages to scan. For example, to scan
only the first two pages of a document, move the page slider to 2.
 Page Number
Select Page Number to limit your cache size by the number of scanned pages it contains. For your
information, a Letter/A4 color document scanning at 300 dpi consumes approximately 24 MB.
 Memory Size
Select Memory Size to limit your cache size by memory size. The amount of available memory depends
on your computer.
Energy Saving Control
 Enable Energy Saver (Power Saving Mode)
Move the slider to set the amount of idle time before the scanner enters Power Saving Mode.
 Enable Power Off
Select the Enable Power Off check box and move the slider to set the amount of idle time before the
machine automatically powers off.
NOTE
• You cannot disable Enable Energy Saver.
• If you clear the Enable Power Off check box, your machine will not power off automatically.
• Power Off time must be greater than or equal to Energy Saver time.
Show Scanning Progress
Select the Show Scanning Progress check box to display the scanning progress bar during scanning.
Show Warning Message
Select the Show Warning Message check box to display warning messages. If the rollers are near their
end-of-life period, a warning message appears once per day until you reset the counter.
Save Settings after Closing
Select the Save Settings after Closing check box to save your settings when you close the Scanner
Properties dialog box. The next time you open the Scanner Properties dialog box, the previous settings
will appear.
NOTE
This item is displayed only when using a TWAIN-compliant application such as OmniPage.
5
54