Yanmar 6LPA-STP2 Service Manual page 97

Cylinder Head
12/05
3. Remove the joint bolt under the oil pan and
drain all the engine oil, then remove the oil
dipstick.
4. Remove the turbocharger (Figure 5-7, (1)).
Figure 5-7
(1)
Figure 5-7
5. Remove the freshwater tank (Figure 5-7, (2)).
6. Remove the fuel filter (Figure 5-8, (1)).
7. Remove the intake manifold and intercooler
(Figure 5-8, (2)).
Figure 5-8
(1)
(3)
Figure 5-8
1 – Fuel Filter
2 – Intercooler
3 – Fuel Pump
8. Remove the 12 rocker cover bolts, seal
washers, rocker cover and gasket
(Figure 5-9).
6LPA Service Manual
Figure 5-9
(2)
9. Remove the semi-circular plug
(Figure 5-1, (6)).
0004929 10. Remove the timing belt and pulley
(Figure 5-10). See Timing Belt Removal on
page 5-69.
11. Remove the 4 bolts and the oil seal retainer
(Figure 5-10).
Figure 5-10
(2)
0004930
1 – Pry to Remove
12. Remove the fuel injection nozzle. See Fuel
Injection Nozzle Removal on page 6-14.
© 2007 Yanmar Marine International
ENGINE
Figure 5-9
(1)
Figure 5-10
0004931
0004932
5-17