Page 1
UR270 / English Instruction Manual FUNCTION AND CONTROLS ALARM 1 ON -OFF SET/ VOLUME DOWN ALARM 2 ON -OFF SET/ VOLUME UP << / TUNE - / YEAR/MONTH/DAY >> / TUNE + / DISPLAY LIGHT AUTO ON/OFF NIGHT LIGHT ON/OFF/AUTO-SENSOR ON-OFF...
Page 2
UR270 / English Instruction Manual LED DISPLAY Power connection Plug the AC power cord to a household outlet AC source. This unit is equipped with a battery back up system, it requires a 3V CR2032 flat lithium battery (not included). Insert the battery in the battery compartment, making certain that the positive and negative (+ and -) battery terminals are attached to the corresponding terminals on the plate in the battery compartment.
Page 3
UR270 / English Instruction Manual Setting Alarm 1 and Alarm 2 – Press the alarm set button (1/2) during normal mode to show the alarm time. Afterwards keep depress the alarm set button (1/2) over 2 seconds to enter the alarm set mode. After enter the setting mode, press the alarm set button (1/2) to change the mode cycle as follows: Normal →...
Page 4
UR270 / English Instruction Manual Display light auto on/off function - Press >>/TUNE+/DISPLAY LIGHT AUTO ON-OFF button (4) for 3 seconds, the LED display Indicator will light on, the LED display will turn off after 15 seconds automatically, Press any button to maintain the LED display for 15 seconds.
Page 5
3 minutes and then setup the unit again as if it is a brand new unit. Copyright by Wörlein GmbH, D 90556 Cadolzburg – soundmaster® Technical specifications, changes and errors are subject without any notice...
Need help?
Do you have a question about the UR270 and is the answer not in the manual?
Questions and answers