SOUNDMASTER UR-2010 Instruction Manual

SOUNDMASTER UR-2010 Instruction Manual

Hide thumbs Also See for UR-2010:

Advertisement

Quick Links

UR - 2010
Bedienungsanleitung
Instruction manual
Mode d´emploi

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the UR-2010 and is the answer not in the manual?

Questions and answers

Summary of Contents for SOUNDMASTER UR-2010

  • Page 1 UR - 2010 Bedienungsanleitung Instruction manual Mode d´emploi...
  • Page 2 WARNING: SHOCK HAZARD – DO NOT OPEN!!! Key List 1. Mounting bracket 11. Battery Hatch 2. MODE 12. MEMORY / KEY LOCK 3. UP 13. MEM 5 /10 4. Alarm 1 / VOL + 14. MEM 4/9 5. TIMER/ALARM MODE/SDA MODE 15.
  • Page 3 How to used • As the unit is powered up, the date and clock are defaulted to Monday, 1 2007, 0:00 or 12:00AM. • The two alarms are defaulted to 0:00 or 12:00AM, daily type but disabled. • The radio is switched off. •...
  • Page 4 steady. • Press <MODE> once to confirm the current setting and it switches to set the SDA. • Press other key to start its corresponding function. • When no key has been pressed for 10 seconds, the current setting is confirmed and it switches to auto-run mode automatically.
  • Page 5 • Similar to <M1>, press <M2>, <M3>, <M4> or <M5> to select the desired preset memory value. • Press <UP> or <DOWN> to adjust the value (from 1 minute to 23hours and 59minute), press <TIMER> to start the cooking timer and the current value will store in to memory automatically.
  • Page 6 When alarm is active • When the real time clock matches with the alarm which has been enabled, alarm becomes active. • As the alarm becomes active, the Cooking timer, if exists, is terminated immediately. • If Beep sound alarm is selected, Sound of beep toggles at the Speaker Muted Radio even radio ON The duration of alarm is 10 minutes...
  • Page 7 • Press and hold <DOWN> to search the next radio station by moving the receiving frequency down. Memory review • When the radio is ON, press <M/SCAN> once to scan the 10 preset memory stations. • The review starts from the next memory station or MEM-1 if no memory station is being selected.

Table of Contents