Brother DCP-9055CDN Basic User's Manual page 19

WARNING
DO NOT touch the shaded parts shown in
the illustration. These rollers may be
rotating at high speed.
b
While pressing the green paper-guide
release lever (1), slide the paper guides
to fit the paper size you are loading in
the tray. Make sure that the guides are
firmly in the slots.
1
c
Fan the stack of paper well to avoid
paper jams and misfeeds.
d
Put paper in the tray and make sure:
 The paper is below the maximum
paper mark (b b b) (1).
Over filling the paper tray will cause
paper jams.
 The side to be printed on must be
face down.
 The paper guides touch the sides of
the paper so it will feed properly.
Loading paper
2
11