Using your corded base
3. Using the phone
3.1
Calls
3.1.1
Make a call
1. Lift the handset and dial the number.
3.1.2
Preparatory dialling
1. Dial the number rst. If you make a mistake press
2. Lift the handset to dial.
3.1.3
End a call
1. Place the corded handset back on the telephone base.
3.1.4
Receive a call
When you receive a call, the base rings and
1. Simply lift the corded handset to answer the call.
3.2
Adjust the earpiece volume
1. During a call, press
choose from.
3.3
Mute
You can mute your base so that you can talk to someone nearby without your caller
hearing.
1. During a call, press
S
2. Press
again to resume your call.
3.4
Intercom
3.4.1
Make an internal call
You can make internal calls between the base and handset.
*
1. Press and hold
2. If only one handset is registered to the base that handset will ring.
m
3. If more than one handset is registered to the base scroll
press
.
3.4.2
Receive an internal call
1. Lift the handset to answer the call.
Note
If during an internal call you receive an incoming call, you will hear the alert tone on the
base.
Replace the handset and pick up again to answer the call and end the internal call.
20
or
to increase or decrease the volume. There are 5 levels to
u
d
S
. The display shows
on the base.
p
to delete the last digit.
flashes on the display.
MUTE ON
and your caller cannot hear you.
to the required handset and
d
Using the phone