Call Voicemail; Voicemail Settings; Basic Operation; Making Calls With The Corded Handset - Motorola ML25260 Full User Manual

3. Press SELECT softkey and you may program the following items:
CALL VM
SETTINGS
7.7.1

Call Voicemail

VOICE MAIL
From the
Using VOL + and VOL - of the navigation button to scroll to
1.
2. Using VOL + and VOL - of the navigation button to scroll to
softkey.
3. The phone will dial your voicemail access number for that line. You may proceed to access your
voicemail per your service provider's instructions.
7.7.2

Voicemail Settings

From the VOICE MAIL
1. Using VOL + and VOL - of the navigation button to scroll to SETTINGS. Press
2. Using VOL + and VOL - of the navigation button to scroll to
softkey.
3. Use the dial pad to enter the call-in access number for your voicemail. Press DELETE button to
backspace and delete numbers, if necessary.
4. When you are finished, press
8

Basic Operation

8.1

Making Calls with the Corded Handset

1. Pick up the handset and the unit will select the first available line. If both lines are available,
Line 1 will be used first.
Or, pick up the handset and press LINE 1 or LINE 2 button to select the line you want.
2. Wait for a dial tone, then dial a phone number.
3. Hang up the handset when finished.
8.2

Making Calls with the Speakerphone

1. Press s and the unit will pick the first available line. If both lines are available, Line 1 will be
used first.
Or, press LINE 1 or LINE 2 button to select the line, and the base speaker will activate.
2. Wait for a dial tone, then dial a phone number or press a One-Touch Memory (1-10) button to
dial stored phone number.
3. Press s when finished.
NOTE
After pick the line, the call timer starts to run until all the calls are hung up. The timer serves for
both 2 lines.
8.3

Making Calls with a Wired Headset

1. Plug the headset into the Headset jack on the side of the unit.
2. Adjust the headset to rest comfortably on top of your head or over your ear.
3. Move the microphone to approximately 2 to 3 inches from your mouth.
4. Press HEADSET and the phone will select the first available line. If both lines are available,
Line 1 will be used first.
5. Wait for a dial tone, then dial the phone number.
6. Press HEADSET when finished.
NOTE
Although this device will accept a variety of standard 2.5mm telephone headsets, Motorola does
not guarantee compatibility with third party devices. Performance may vary depending on the
quality of the headset.
20
menu:
menu:
SAVE
softkey.
CALL VM. Press SELECT
LINE 1 or LINE 2 and press
SELECT
LINE 1 LINE 2
or and press
softkey.
SELECT
softkey.
SELECT