Table of Contents
Advertisement
Chapter1
Thank you for purchasing the WUS-3200 USB MFP server. This product is
designed to connect your printers, USB Mass Storage/Memory Card Reader,
and scanners of HP all-in-one printers (MFP), anywhere in your wired or
wireless network, allowing all network users access to shared USB devices
resources.
1.1
About this Manual
This manual provides introductory information as well as detailed instructions
on how to set up and manage the print server in various network
environments. To fully benefit from this manual, you should be familiar with
basic networking principles.
These instructions are based on the settings in a new MFP server. To reload
the Factory Parameters, you can perform a Factory Default, which will restore
most of the settings. See "Factory Default" on page.
1.2
Support Services
Should you require any technical assistance, please contact your product
reseller. Or you can visit our website at
product information.
This manual is subject to change without notice.
Introduction
http://www.level1.com
1
for latest
Advertisement
Table of Contents
Need help?
Do you have a question about the WUS-3200 and is the answer not in the manual?