LevelOne WUS-3200 User Manual page 11

and then access point. If parameters mismatch causes wireless
access is not allowed, you have to modify those parameters through
LAN connection.
In infrastructure mode, the maximal transfer rate is 54 MBits
depending on access point's capability. In ad-hoc mode, only
802.11b (the maximal transfer rate is 11 MBits) is allowed by
specification.
3.2.2 Set Wireless Configuration Using MFP Server Control Center
1. Install MFP Server Control Center. MFP Server Control Center is
available in the WUS-3200 USB MFP Server Product CD.
2. Start MFP Server Control Center and Auto-searching MFP server
window will appear.
If the wireless parameters are not correct or not set yet, you have to use LAN
to access MFP Server Control Center.
3. If the tool finds MFP servers in your local area network, then you have
to select a MFP server from the server list.
8