Front + Rear Panel Sp-A2200 - Spectron SP-A1500D Owner's Manual

CONNECTIONS & CONTROLS

FRONT + REAR PANEL SP-A2200

1 RCA LINE OUPUTS
Low-level stereo RCA outputs for connection with another amplifier, which is
daisy chained, receiving the RCA input signal
2 RCA LINE INPUTS
Low-level stereo RCA inputs for connection with the line-out signal of the head-unit
3 LEVEL CONTROL
Input gain control potentiometer to match the output voltage of the headunit' s
RCA line-outs to the amplifier input
4 BASS EQ CONTROL
Control potentiometer for the adjustment of the bass boost level @45 Hz from 0 to 12dB
5 HIGHPASS FREQUENCY CONTROL
Control potentiometer for the highpass crossover frequency – to cut off bass content
in the signal from 40 to 300 Hz
6 LOWPASS FREQUENCY CONTROL
Control potentiometer for the lowpass crossover frequency – from 30 to 250 Hz
7 OPERATION MODE SWITCH
Slide switch to select the operation mode of the electronic crossover – to set the
amp to highpass, lowpass or fullrange operation
8 MONO / STEREO SWITCH
Slide switch to select mono or stereo operation mode – needs to be set to mono
to drive a subwoofer in brdige mode
9 "GND" POWER INPUT TERMINAL
Terminal to connect the amplifier to the negative or ground pole of the vehicle
10 "REM" INPUT TERMINAL
Terminal to connect the amplifier to the automatic (remote) turn-on / turn-off lead
of the head unit
24