Ceiling Mounting - Panasonic KX-HCM230 Getting Started

Ceiling Mounting

1)
Mount the Flexible Stand firmly to the ceiling or the beam using the three screws (accessories).
• Please use proper screws fit for the material of the ceiling.
2)
Attach the Network Camera by screwing the threaded mount into the tripod mounting hole.
3)
Adjust the position of the Network Camera and secure the Flexible Stand firmly.
4)
Roll up the cables and Flexible Stand with the Self Bonding tape (accessories).
1)
3)
Note
Make sure the Indicator is always in the upper right corner when you mount.
top
bottom
CAUTION
Drive mounting screws into the wall. Be careful to avoid touching any metalwork (metal/wire laths etc.),
conduits or electrical cables buried in the wall.
Trademarks
Ethernet is either a registered trademark or a trademark of Xerox Corporation in the United States and/or other countries.
ActiveX is either a registered trademark or a trademark of Microsoft Corporation in the United States and/or other countries.
All other trademarks identified herein are the property of their respective owners.
Screen shots reprinted with permission from Microsoft Corporation.
2002 Kyushu Matsushita Electric Co., Ltd. All Rights Reserved.
2)
4)
Flexible Stand Mounting
top
bottom
Caulk around
Flexible Stand
if you need
Self Bonding
tape
Please
waterproof
the rest
of the cable.
Wall Mounting
top
bottom
Ceiling Mounting
top
bottom