Top Page; Setup Page - Panasonic KX-HCM230 Getting Started

Hide thumbs Also See for KX-HCM230:

Table of Contents

Select your target Network Camera from the list as shown on example (A) on the Network Camera List

window and click [Select]. The Configuration window appears. Please refer to Page 2 in this Getting

Started and enter the correct network parameters.

Click [Save] on the Configuration window when finishing. The "Successful!" message boxes appear

and click [OK]. The following message box appears and have the links to Top Page and Setup Page

(Network window). Click [Top Page] and Top Page appears. Please refer to Operating Instructions for

the details.

Top Page

Click the language to change the display.

Notes

First viewing the image on the Internet Explorer may display a pop up Security Warning window. The window requests

your permission to download ActiveX

Operating Instructions.

If you are configuring in [Type 3], Top Page may not appear at this point. After the Network Camera is directly connected

with the modem, please check the Network Camera Access from the Internet on Page 32 in the Operating Instructions.

Controls (OCX file) used to display Motion JPEG. Please refer to Page 38 in the

Accessing from the web browser

Enter "http://IP address:Port No."

Enter "http://IP address:Port No./config.html"

in the address field and press [Enter].

(When port no. is 80 (default), you do not need

to enter port no.)

Table of Contents