Basic Settings; Language; Water Hardness; Your Local Water Authority Will Be Able - Miele PG 8083 SCVi Operating Instructions Manual

Basic settings

^ Switch the machine on with the -
button.
If the dishwasher is being switched on
for the first time, the welcome screen
will appear.

Language

The display will then change
automatically to the screen for setting
the language.
See "Display" for more information
about the display.
^ Select the language you want, and
confirm your selection with the
middle button.
A tick will appear next to the
(
language that has been set.

Water hardness

The display will then change to the
screen for setting the water hardness.
– The dishwasher must be
programmed for the water hardness
in your area.

– Your local water authority will be able

to advise you of the water hardness

level in your area.

– Where the water hardness fluctuates,

e.g. between 3.1 - 4.5 mmol/l

(17 - 25 °d - German scale), always
programme the dishwasher to the
higher value (4.5 mmol/l in this
example).
Before using for the first time
In the event of a fault, it will help the
service technician if you know the
hardness of your local water supply.
Enter the water hardness below:
mmol/l or °d
The dishwasher is programmed at the
factory for a water hardness level of 2.7
mmol/l (15 °d - German scale).
^ Select the water hardness you want,
and confirm your selection with the
middle button.
See "Settings menu, Water hardness"
for further information.
The following two messages
and F
rinse aid
appear in the display.
Press any button to confirm these. The
display will change to show the main
menu.
These basic settings will be saved in
memory after the dishwasher has been
through one complete programme.
The welcome screen will no longer
appear once the dishwasher has been
through one complete programme.
Add
(
Add salt
may then
17