Assembling Fuel Bed And Commissioning; Assembling The Ceramics And Fuel Bed (Coal Models) - Cast Tec CTTC00MN Installation, Maintenance & User Instructions

ASSEMBLING FUEL-BED AND COMMISSIONING
3.1 ASSEMBLING THE FUEL-BED
a) Position the two halves of the ceramic front rail onto the support as
shown below in Fig. 5
Fig. 5
NOTE
Please ensure
that the front
bars are fitted to
the Tiled
Surround before
assembling fuel-
bed and coals.
The Images as
shown are with-
out the front
bars fitted for
clarity
b) Place the fuelbed base centrally on to the fuelbed support and push
fully backwards to the rear face of the cast iron back panel.
Make sure that the fuelbed base is located centrally on the burner
tray. See Fig. 6 below.
Fig. 6
SECTION 3
12