Assembling Your Steam Mop - Shark S2902 Owner's Manual

Assembling Your Steam Mop

IMPORTANT: Always make sure the mop is
UNPLUGGED from the wall when not in use. Never
fill the mop, attach the mop head, change or remove
the cleaning pocket when the mop is plugged
into the wall. To prolong the life of your Shark
Professional 2 in 1 Steam Pocket Mop we
recommend using distilled water. Make sure you
only add water to the tank. Chemicals or cleaning
solution may damage the appliance and could be
unsafe for you and your family.
4 1-800-798-7398
fig. 1
1
®
2
3
STEAM MOP ASSEMBLY
Insert the Mop Handle end with the "
the front of the unit into the handheld steamer. Push
the mop handle in until you hear it click into place.
(fig. 1)
Select the Rectangle mop head and the cleaning
pocket. Fit one side of the pocket onto the head first,
then using the loop, pull the pocket over the head.
Attach the quick fasteners on the top of the pocket
to secure in place.
Snap the mop head into the mop body by lining up
the groove on the back of the mop body with the
groove on the back of the mop head. Push until you
hear it latch into place. Press the release button to
remove or change the mop head. (fig. 2)
fig. 2
" facing