Table of Contents
Advertisement
34) SCM (Set Chapter Mode)
Function: If Chapter Numbers are encoded on the disc, the player enters Chapter Mode.
Argument
[Ignored]
Explanation: If the disc has chapter numbers, any argument representing a Disc
Location is treated as a Chapter Number. The Chapter Number is a 1- or 2-digit decimal
number, from 0 through 79. If the disc does not have chapter numbers, the command is
ignored.
NOTE: In Manual Mode, the END button on the RCU can be used to cycle through the
modes that are valid for a specific disc. All discs encoded with Frame Numbers can be
accessed in Frame Mode; CLV discs can be accessed in Time Mode.; and any CAV or CLV
disc with chapters encoded can be accessed in Chapter Mode.
Example: A chapter-coded CLV disc is being used. The frame at 0 hours, 20 minutes,
30 seconds, and 21 frames is displayed for one second. Then, the frame at 11 minutes,
30 seconds, and 0 frames is displayed for one second. Finally, the first frame of Chapter
16 is displayed.
Address
Argument
0100
0101
203021
0108
0111
0112
1130
0117
0120
0121
Pioneer LD-V8000 Level II User's Manual
Hex Code
8C
Command
SFM
SEARCH
10
WAIT
STM
SEARCH
10
WAIT
SCM
16
SEARCH
LD-V8000 Level II • Chapter Four
Mnemonic
SCM
Hex Code
Comment
8E
Use Frame Mode (CLV Disc)
F7
Search to 20 min., 30 sec., 21 frames
FB
and Wait for 1 second
8D
Use Time Code Mode
F7
Search to start of 11 min., second 30
FB
and Wait for 1 second
8C
Use Chapter Mode
F7
Search to start of Chapter 16
TP 114 v. 1.1
RCU Buttons
Play, 8, C
•
8/92
SCM
4-31
Advertisement
Table of Contents
