Table of Contents
Advertisement
Sample Level II Program
Example #4
A selectable continuously repeating Attract Loop with a selectable Main Feature. Set
on screen function switches for Load from Memory. Then, when the disc is inserted in the
drawer, and PLAY is pressed, the Level II program in memory is automatically executed.
The Program starts by setting frame mode and audio channel 1 on, then searches to a still
frame 00210, and waits for only one input to start attract loop....Press 0 to start Attract Loop
(frame 02113 to 03493). The attract loop repeats continually until 1 is pressed to play the
Main Feature Motion Segment (frame 05619 to 06564). At the end of the Main Feature, the
program automatically branches back to the continuously repeating attract loop.
Flow Chart of Example #4
This flow chart looks simple, but actually the program is difficult to understand unless one
well understands the IIN (Interrupt Input) and COM (Compare) commands.
F-12
TP 114 v. 1.1 • 8/92
Set Frame Mode
Select Audio 1
Show the
Wait Menu
(no Timeout)
0, (Ignore 1-9)
Interruptable
Attract Loop
done
Sample Flow Chart & Level II Code — RCU Entry
Interrupt
on "1"
Motion Segment
Feature
Appendix F
Advertisement
Table of Contents
