Slow (Slow Speed) - Pioneer LD-V8000 User Manual

Chapter Four • LD-V8000 Level II
PAUSE SLOW
;
25) PAUSE
Function: The PAUSE command just delays program execution for a period of time.
Argument
[Integer]
Explanation: The command tells the player to wait for the designated time before
executing the next instruction. Motion in progress may continue. The argument
specifies the delay in tenths of a second. No argument means no delay.
Note: The maximum delay is 1000 seconds (10,000 tenth seconds, or 10000 PAUSE).
Example: Play the first 13.5 seconds of material after Frame 1000 and stop.
Address Argument
0100 1000
0105
0106 135
0110

26) SLOW (Slow Speed)

Function: SLOW selects a "slow" speed to be used by the MULTI-SPEED commands.
Argument
[Integer]
Explanation: This command selects one of the several predefined "slow" playback
speeds to be used by the next MULTI-SPEED FWD or MULTI-SPEED REV. It usually
selects a slower than normal speed. An argument from 1 to 127 selects a speed from the
following table.
Note: A missing or zero argument will select "zero" speed. Then, a following MSF or
MSR command will be ignored. The argument is taken modulo 128.
4-26
Hex Code
0D
Command Hex Code
SEARCH F7
PLAY FD
PAUSE 0D
WAIT FB
Hex Code
ED
TP 114 v. 1.1 • 8/92
Mnemonic
PAU
Comment
Go to Frame 1000
and begin playing the disc
Delay program execution for 13.5 sec.
and Still Mode at the current frame
Mnemonic
SS
Pioneer LD-V8000 Level II User's Manual
RCU Buttons
Play, 0, D
RCU Button
SLOW