GMC Sierra Classic 2007 Owner's Manual page 67

2. See Securing a Child Restraint in the Right
Front Seat Position (With Airbag Off Switch)
on page 74 or Securing a Child Restraint
in the Right Front Seat Position (With
Passenger Sensing System) on page 80 or
Securing a Child Restraint in the Right
Front Seat Position (Heavy Duty Crew Cab
Only) on page 85 for instructions on installing
the child restraint using the safety belts.
3. Push and pull the child restraint in different
directions to be sure it is secure.
Extended Cab Models
1. Attach and tighten the lower attachments to
the lower anchors. If the child restraint does
not have lower attachments or the desired
seating position does not have lower anchors,
secure the child restraint with the top tether
and the safety belts. Refer to your child
restraint manufacturer instructions and the
instructions in this manual.
1.1. Find the lower anchors for the desired
seating position.
1.2. Put the child restraint on the seat.
1.3. Attach and tighten the lower
attachments on the child restraint to the
lower anchors.
2. If the child restraint manufacturer recommends
that the top tether be attached, attach and
tighten the top tether to the top tether anchor,
if your vehicle has one. Refer to the child
restraint instructions and the following steps:
2.1. When using a child restraint with a top
tether in the rear driver's side position,
raise the head restraint and route
the top tether through the fabric loop
and under the center shoulder belt.
Then, attach the top tether to the metal
anchor point at the center rear
seating position.
67